How to Write a Results Section: APA Statistics, Tables and Examples
To write a results section, report findings in research-question order with full statistics or themed extracts, use tables and figures for detail, and leave interpretation for the discussion. Includes APA templates.
To write a results section, report your findings in the order of your research questions or hypotheses, starting with descriptive statistics and then the tests or themes that answer each question, using tables and figures for detail and the text for the key points. Report results objectively, in the past tense and with complete statistics, and save interpretation and comparison with other studies for the discussion.
This guide covers quantitative and qualitative results for dissertations, research papers and lab reports. It explains APA style for reporting numbers and gives copy-ready templates for t tests, ANOVA, chi-square and correlation. It also covers when to use a table or a figure, how to write up themes with quotations, and how expectations change between disciplines and regions. Every statistic in the worked examples was recalculated by script from the invented summary data shown. The guide was prepared by FLN Tutors (Freelancer Network) tutors who teach research methods and statistics and give feedback on dissertation results chapters.
Key facts: the results section at a glance
| Question | Short answer |
|---|---|
| What goes in it? | Sample description, descriptive statistics, test results or themes, tables and figures |
| What stays out? | Interpretation, explanations, comparison with literature, raw data |
| What order? | Research question or hypothesis order, primary before secondary |
| What tense? | Past tense for findings ("scores increased") |
| How long? | Often 15 to 20% of an empirical dissertation |
| Which style for numbers? | APA in psychology, education and many social and health sciences; otherwise your department's style |
| Where does raw data go? | An appendix or data repository, if required |
What is a results section, and what does it include?
A results section is the part of a research report that presents what your data showed, objectively and without interpretation. It answers "what did I find?"; the discussion answers "what does it mean?". In qualitative research, the same section is often called "findings".
A complete quantitative results section usually includes:
- Participants and data: final sample size, exclusions and any missing data handling, if not already in the method.
- Descriptive statistics: means, standard deviations, frequencies and percentages for the main variables.
- Assumption checks: a brief note on normality, homogeneity of variance or other assumptions, with what you did if they were violated.
- Inferential statistics: the test for each hypothesis with the test statistic, degrees of freedom, exact p value, effect size and, ideally, a confidence interval.
- Tables and figures: numbered, titled and referred to in the text.
- Secondary or exploratory analyses: clearly labelled as such, after the main analyses.
A qualitative findings section presents themes or categories, each supported by data extracts and a short analytic commentary.
How long should a results section be?
Length depends on how many questions and analyses you have, not on a target. These planning ranges are common:
| Document | Typical total | Results share | Approximate results length |
|---|---|---|---|
| Undergraduate dissertation | 10,000 words | 15 to 20% | 1,500 to 2,000 words |
| Master's dissertation | 15,000 words | 15 to 20% | 2,250 to 3,000 words |
| Undergraduate lab report | 2,000 words | 15 to 20% | 300 to 400 words plus tables |
Tables and figures often fall outside the word count, so a concise text with well-designed tables is usually better than long paragraphs of numbers. Check your handbook.
How to write a results section in 7 steps
- List your research questions or hypotheses. These become the headings or the order of the section.
- Build tables and figures first. Decide which results need a table or figure, and design them before writing the text.
- Describe the sample and data. Give the final numbers analysed and any exclusions.
- Report descriptive statistics. Summarise the main variables, often in one table.
- Report each analysis in order. Name the test, give the full statistics, and state plainly whether the hypothesis was supported.
- Point to tables and figures. Highlight the key result rather than repeating every number.
- Check against the discussion. Every result you plan to interpret must appear here, and nothing here should be interpretation.
How do you report statistics in APA style?
APA style (7th edition) sets clear rules for numbers and statistics. Purdue OWL's summary of APA numbers and statistics is a reliable quick reference, and our APA referencing guide covers citations and the reference list. The core rules are:
| Rule | What to do | Example |
|---|---|---|
| Decimal places | Two decimals for t, F, χ², r and proportions; means and SDs to one or two decimals depending on the precision of the measure | t(96) = 2.99; M = 24.6 |
| Leading zero | Omit it for values that cannot exceed 1, such as p and r; keep it for values that can | p = .004, r = .34, d = 0.60 |
| Exact p values | Report exact values to two or three decimals; below .001, write p less than .001 | p = .011 |
| Statistical symbols | Italicise Latin-letter symbols such as M, SD, t, F, p, r and N; Greek letters stay upright | M, SD, t; η² |
| Spacing | Put spaces around =, + and similar operators | p = .057 |
| Sample size | Capital N for the total sample, lower-case n for a subgroup | N = 120; n = 40 |
| Confidence intervals | Give the level and the limits in square brackets | 95% CI [1.11, 5.49] |
| Effect sizes | Report with every main test | d = 0.60; η² = .05 |
| Numbers in words | Use numerals for 10 and above and for all statistics; words for most numbers below 10 in text | seven participants; 24 participants |
| Percentages | Numerals with the % symbol in text | 63.3% |
Two notes on this page's formatting: the site cannot display italics, so statistical symbols appear in roman type here, but you should italicise them in your own work. And the less-than sign is written out in words in the table above for technical reasons; in your report, use the symbol: p followed by the less-than sign and .001.
APA templates for common statistical tests
Each example below uses invented summary data, and every value was recalculated by script.
| Test | Invented summary data | APA-style report |
|---|---|---|
| Independent t test | App users n = 48, M = 24.6, SD = 5.1; non-users n = 50, M = 21.3, SD = 5.8 | t(96) = 2.99, p = .004, d = 0.60, 95% CI [1.11, 5.49] |
| One-way ANOVA | Three teaching formats, n = 40 each, M = 61.2, 66.5 and 63.1, SD = 9.8, 10.4 and 9.5 | F(2, 117) = 2.94, p = .057, η² = .05 |
| Chi-square (2 x 2) | Passed: 38 of 60 online and 24 of 60 on campus | χ²(1, N = 120) = 6.54, p = .011, φ = .23 |
| Pearson correlation | r = .34 between weekly study hours and module mark, N = 120 | r(118) = .34, p below .001, 95% CI [.17, .49] |
| Non-significant t test | Group A n = 30, M = 3.42, SD = 0.88; group B n = 30, M = 3.61, SD = 0.95 | t(58) = −0.80, p = .425, d = −0.21 |
In the text, put the statistics at the end of the sentence that states the finding, for example: "Students who used the revision app scored higher on the module test (M = 24.6, SD = 5.1) than students who did not (M = 21.3, SD = 5.8), t(96) = 2.99, p = .004, d = 0.60."
For regression, report the overall model (R², F, degrees of freedom and p) and then each predictor's coefficient, standard error, t and p, usually in a table. For non-parametric tests, report the test statistic (for example U for Mann-Whitney), the sample sizes, p and an effect size, with medians rather than means.
How do you report descriptive statistics?
Descriptive statistics summarise your data before you test anything. Report:
- Continuous variables: mean and standard deviation, or median and interquartile range for skewed data.
- Categorical variables: counts and percentages, with the denominator clear, for example "38 of 60 (63.3%)".
- Sample characteristics: age, gender or other relevant details, usually in the first table.
Use a table when you have more than a handful of values. A useful rule of thumb from APA guidance is to put three or fewer numbers in a sentence, use a table for about 4 to 20 numbers, and consider a figure for more than 20.
When should you use a table or a figure?
| Use a table when | Use a figure when |
|---|---|
| Readers need exact values | The pattern or trend matters more than exact values |
| You are comparing many variables or groups | You are showing change over time or a relationship |
| You report descriptive statistics or regression output | You show interactions, distributions or group differences |
APA 7 formatting for both: the number in bold above the table or figure (Table 1, Figure 1), a title in italic title case on the next line, clear column or axis labels, and notes underneath for abbreviations, sources or significance markers. Tables use horizontal lines only. The American Psychological Association's guidance on tables and figures shows sample layouts.
Rules that apply in every style:
- Refer to every table and figure in the text before it appears.
- Make each one understandable on its own, with units and sample sizes.
- Do not repeat the whole table in the text; highlight the key result.
- Do not show the same data in both a table and a figure.
- Use readable, accessible colours and label error bars with what they represent.
Worked example: a quantitative results paragraph
The study is invented. 120 students were taught a statistics module in one of three formats (lecture, flipped and blended, 40 per group). The researcher also recorded whether online and on-campus students passed a follow-up test and how many hours each student studied per week.
"Mean module marks were 61.2 (SD = 9.8) in the lecture group, 66.5 (SD = 10.4) in the flipped group and 63.1 (SD = 9.5) in the blended group (Table 2). A one-way ANOVA found no statistically significant difference between teaching formats, F(2, 117) = 2.94, p = .057, η² = .05. Hypothesis 1 was therefore not supported. A higher proportion of online students (38 of 60, 63.3%) than on-campus students (24 of 60, 40.0%) passed the follow-up test, χ²(1, N = 120) = 6.54, p = .011, φ = .23, supporting Hypothesis 2. Weekly study hours were positively correlated with module mark, r(118) = .34, p below .001, 95% CI [.17, .49] (Figure 1)."
Notice what the paragraph does: it follows hypothesis order, gives descriptive and inferential statistics together, states whether each hypothesis was supported, points to a table and a figure, and offers no explanation of why the flipped group scored higher. That belongs in the discussion.
How do you write up qualitative findings?
Qualitative findings are usually organised by theme, with each theme supported by extracts from the data. A reliable pattern for each theme is claim, evidence, commentary:
- Name and define the theme in one or two sentences.
- Describe its scope: subthemes, variation between participants, and any negative or contrasting cases.
- Present two or three short extracts that illustrate it, each labelled with an anonymised participant code and relevant details, such as "P7, final-year nursing student".
- Add analytic commentary that explains what the extracts show, without moving into comparison with the literature.
Further rules:
- Show the structure first. A table or diagram of themes and subthemes helps the reader.
- Avoid precise counting unless prevalence matters to your question; terms such as "most", "several" or "a few" are acceptable if you define them.
- Edit extracts carefully. Remove fillers and identifying details, mark omissions with ellipses, and never change the meaning.
- Include contrasting voices. Negative cases strengthen credibility.
- Keep transcripts in an appendix if your department asks for them, with participant consent.
Worked example: a qualitative findings extract
This extract uses an invented study of 12 international postgraduate students and their experience of seminar participation.
"Theme 2, Waiting for permission, describes participants' sense that they needed an explicit invitation before speaking in seminars. Most participants described rehearsing contributions without voicing them, particularly in the first term. One explained: 'By the time I had the sentence ready, the topic had already moved on' (P4, MSc Management). Others linked waiting to expectations from previous education: 'At home the teacher asks you by name, so I was waiting for my name' (P9, MA Education). Two participants described the opposite pattern, speaking early to 'get it over with' (P11, MSc Finance), which suggests that waiting was common but not universal. The theme was strongest in accounts of large seminars and weakest in small project groups."
The extract defines the theme, uses labelled quotations, includes a contrasting case and comments on scope, but leaves explanation and theory for the discussion.
How do results sections differ by document type, discipline and region?
| Context | What changes |
|---|---|
| Dissertation | A full chapter with subheadings per research question; descriptive statistics and assumption checks in detail; long tables in appendices |
| Journal-style paper | A tighter section; often only the analyses central to the argument; supplementary materials online |
| Lab report | Short; processed data in tables and graphs, with uncertainties; raw readings in an appendix. Our lab report guide covers uncertainty and error |
| Psychology, education, health | APA style for statistics is standard |
| Medicine and nursing journals | Often AMA- or Vancouver-based house styles, which differ in details such as a capital P for p values |
| Engineering and physical sciences | Results and discussion are frequently combined, with SI units and significant figures emphasised |
Regional notes:
- UK and Ireland: dissertations usually keep results and discussion separate in quantitative work; the British Psychological Society expects APA-style reporting in psychology.
- United States: APA style dominates the social sciences; theses often place results in chapter 4 of a five-chapter model.
- Australia and New Zealand: honours theses follow UK-like conventions; thesis-by-publication formats report results within each paper.
- Europe: English-language theses use the decimal point even where the local language uses a decimal comma; ECTS master's theses often follow journal article structure.
- Singapore, Malaysia and the Gulf: follow British, American or journal conventions depending on the institution's model; check whether APA or a house style applies.
Common results section mistakes
- Interpreting instead of reporting. Words such as "suggests" or "because" belong in the discussion.
- Incomplete statistics. A p value with no test statistic, degrees of freedom or effect size.
- Writing "p = .000". Statistical software rounds tiny values; report p less than .001 instead.
- Repeating tables in the text. Highlight, do not duplicate.
- Unlabelled or unreferenced visuals. Every table and figure needs a number, title and a mention in the text.
- Leaving out non-significant results. Report every planned analysis.
- Inconsistent decimals. Pick the APA convention and apply it throughout.
- Quotations without commentary. In qualitative work, extracts must be explained.
If your analysis itself is shaky, sort that out before writing. Our statistics tutors can check test choice and output, and the Master Statistics course builds the underlying skills.
Getting help with your results section
A tutor can help you choose the right tests, read software output, build APA tables and turn numbers into clear sentences. For qualitative work, a tutor can review your theme structure and extract selection. Through our dissertation support, you can get feedback on a draft results chapter before you send it to your supervisor. We match you with a tutor who has a postgraduate qualification involving the same type of analysis, such as a psychology or public health graduate experienced with SPSS, R or NVivo.
Tutors explain methods and give feedback on your write-up; the analysis and the results you submit must be your own.
Frequently asked questions
Should I interpret my results in the results section?
No, in most dissertations and papers. The results section reports what you found; explanations, comparisons with other studies and implications belong in the discussion. You can state plainly whether each hypothesis was supported. If your department or journal uses a combined results and discussion section, keep reporting and interpretation in separate sentences or paragraphs.
How do I report a p value of .000 from SPSS?
Write p less than .001, using the less-than symbol. SPSS and other software display .000 because the value has been rounded to three decimals, but a p value is never exactly zero. Under APA style, report exact p values to two or three decimals for values of .001 and above, and use the less-than form below that.
Do I need to report effect sizes?
Yes, for every main test in APA style and in most current research. Effect sizes such as Cohen's d, eta squared, phi or r show how large an effect is, which a p value does not. Many markers now treat missing effect sizes as incomplete reporting, especially in psychology, education and health research.
How do I report non-significant results in APA style?
Report them in full, exactly like significant results: the test statistic, degrees of freedom, exact p value and effect size, for example t(58) = −0.80, p = .425, d = −0.21. Then state that the hypothesis was not supported. Do not describe the result as "approaching significance" or omit it.
How many decimal places should I use in APA style?
APA generally recommends two decimal places for correlations, proportions and inferential statistics such as t, F and chi-square, and two or three for exact p values. Means and standard deviations are usually given to one or two decimals, depending on how precisely the variable was measured. Apply your chosen convention consistently throughout.
How do I report percentages in APA style?
Use numerals with the percent symbol in the text, for example 63.3%, and make the denominator clear, such as "38 of 60 participants (63.3%)". Use the word "percentage" when no number is given. In tables, the symbol can appear in the column heading. Keep the number of decimals consistent across the section.
Should the same data appear in a table and in the text?
Not in full. Use the table for exact values and the text to highlight the key comparisons or test results. Repeating every number in the text wastes words, while text that only says "see Table 1" leaves the reader to find the point. Mention the most important values and point to the table.
Where should raw data go?
Raw data, full software output and long transcripts usually go in an appendix or a data repository, if your department requires them at all. The results section presents processed data: summary statistics, test results and selected extracts. Check ethics approval and consent before sharing any participant data, even anonymised.
How many quotations should I include for each qualitative theme?
Two or three short, well-chosen extracts per theme or subtheme is a common guide. Each should illustrate a specific point, carry a participant code and be followed by your commentary. Avoid long blocks of quotation with little analysis, and include a contrasting extract where participants disagreed.
Is a findings chapter the same as a results chapter?
Broadly, yes. "Results" is the usual heading for quantitative research and "findings" for qualitative or mixed-methods research. Both present what the data showed without interpretation. Some qualitative dissertations combine findings and discussion in one chapter, so check what your department expects before you plan.
How do markers assess a results chapter?
Markers check whether results are complete, accurate and clearly organised around the research questions, whether statistics or themes are reported correctly, and whether tables and figures are clear and referenced. Higher bands reward precise, concise reporting, appropriate effect sizes and honest treatment of non-significant or contrasting results.
Can a tutor check my statistics and results write-up, and how does it work?
Yes. Share your output, draft chapter and research questions for a free quote, then choose written feedback with delivery options from 3 to 48 hours or book live sessions at the hourly rate on the tutor's profile. Free revisions within the original brief are included, work is confidential, and the analysis stays your own.
Want a subject expert to help with this?
Book a tutor →Money-Back Guarantee
Full refund if we miss the agreed deadline, can't find a suitable expert, or major errors can't be fixed by revision.
Learn more →100% Confidential
Your identity, order details and institution are never shared with any third party.
Learn more →Deadline-Backed Delivery
Every order has an agreed deadline. If we don't deliver by it, you can claim a full refund.
Learn more →Get started today
Ready to get expert help?
Tell us what you need and get matched with a tutor who teaches your subject. Delivered on time, every time.
