These four calculations appear across Units 1, 2 and Booklet B. The figures are illustrative practice data, not CCEA results, and the relative atomic masses are the rounded values on the CCEA data leaflet.
1. Water of crystallisation (Prescribed Practical C1). A crucible holds 2.50 g of hydrated copper(II) sulfate, CuSO₄·xH₂O. After heating to constant mass, 1.60 g of anhydrous salt remains.
| Step | Working | Result |
|---|
| Mass of water lost | 2.50 − 1.60 | 0.90 g |
| Moles of CuSO₄ (Mr 159.5) | 1.60 ÷ 159.5 | 0.0100 mol |
| Moles of water (Mr 18) | 0.90 ÷ 18 | 0.0500 mol |
| Ratio water : CuSO₄ | 0.0500 ÷ 0.0100 | 4.98, so x = 5 |
| Percentage of water | 0.90 ÷ 2.50 × 100 | 36.0% |
The formula is CuSO₄·5H₂O, whose Mr is 159.5 + 90 = 249.5, giving a theoretical 36.1% water. Heating to constant mass matters: if the second and third weighings differ, some water is still in the crystals and x comes out too small.
2. Titration (Prescribed Practical C8). 25.0 cm³ of sodium hydroxide is titrated with 0.100 mol/dm³ hydrochloric acid. The accurate titres are 20.1, 20.2 and 20.0 cm³, recorded to one decimal place as CCEA asks; the rough titre is left out.
| Step | Working | Result |
|---|
| Mean titre | (20.1 + 20.2 + 20.0) ÷ 3 | 20.10 cm³ |
| Moles of HCl | 0.100 × 20.10 ÷ 1000 | 0.00201 mol |
| Moles of NaOH (1 : 1) | same as HCl | 0.00201 mol |
| Concentration in mol/dm³ | 0.00201 ÷ 0.0250 | 0.0804 mol/dm³ |
| Concentration in g/dm³ | 0.0804 × 40 | 3.22 g/dm³ |
3. Gas volume. CCEA states that one mole of any gas occupies 24 dm³ at 20 °C and 1 atmosphere. 0.48 g of magnesium reacts with excess acid: 0.48 ÷ 24 = 0.020 mol of Mg, which gives 0.020 mol of hydrogen, so 0.020 × 24 = 0.48 dm³, or 480 cm³.
4. Atom economy and Rf. For CaCO₃ → CaO + CO₂, the atom economy for calcium oxide is 56 ÷ (56 + 44) × 100 = 56%. In a paper chromatogram where a dye moves 3.6 cm and the solvent 8.0 cm, Rf = 3.6 ÷ 8.0 = 0.45.