Fictional readings. 0.3050 g of potassium bromide is dissolved, 50.0 mL of 0.1 M silver nitrate is added, and the excess silver is titrated with 0.1 M ammonium thiocyanate using ferric ammonium sulphate indicator, needing 25.6 mL. The solutions were standardised earlier: silver nitrate is actually 0.1012 M (molarity factor 1.012) and thiocyanate 0.0985 M (factor 0.985).
| Step | Working | Result |
|---|
| Silver added | 50.0 × 0.1 × 1.012 | 5.060 mmol |
| Silver left over (equals thiocyanate used) | 25.6 × 0.1 × 0.985 | 2.522 mmol |
| Silver that reacted with bromide | 5.060 − 2.522 | 2.538 mmol |
| Mass of KBr (119.00 mg/mmol) | 2.538 × 119.00 | ≈ 302.0 mg |
| Purity | 302.0 ÷ 305.0 × 100 | ≈ 99.0% |
The molarity factor is the actual molarity divided by the nominal one, and it multiplies every titre of that solution. The back-titration is used because the Volhard indicator only works in acid, where chromate (Mohr) fails. For bromide the silver bromide need not be filtered off, but for chloride it must be, or coated with an immiscible liquid, because silver chloride is more soluble than silver thiocyanate and would react with the titrant.