2 verified Pharmacognosy II specialists

Pharmacognosy II Assignment Help & Online Tutoring

Pharmacognosy II, taught in India as Pharmacognosy and Phytochemistry II in the fifth semester of the B.Pharm, is the course on secondary metabolites: how plants make alkaloids, glycosides, terpenoids, phenylpropanoids, tannins, resins and volatile oils, which crude drugs contain them, and how named constituents are isolated, identified and produced industrially. FLN Tutors (Freelancer Network) helps B.Pharm and international pharmacy students one-to-one with its pathways, monographs, isolation schemes, practical records and viva preparation. This page lays out the syllabus unit by unit, explains the biosynthesis and isolation questions students find hardest, works through two laboratory calculations with every figure rechecked by script, and shows how to structure answers that earn full marks. It is educational and course level only. For the Semester IV foundations, see [Pharmacognosy I](/subjects/pharmacognosy-i); for plant chemistry in general, see our [Phytochemistry](/subjects/phytochemistry) page. Matched to a verified specialist who knows your course, your university's marking criteria, and your deadline.

100% ConfidentialFree RevisionsPlagiarism-Free
150+
Topics covered
2
Pharmacognosy II specialists

Online Pharmacognosy II tutoring

FLN offers one-to-one online Pharmacognosy II tutoring with verified subject specialists. Sessions focus on core theory, clinical application and exam preparation, including Alkaloids, Glycosides, Terpenoids and Steroids, using your own course material, so you understand the subject and can apply it yourself.

Last updated

Levels we tutor

  • Undergraduate
  • Master's
  • PhD

What is Pharmacognosy II?

Pharmacognosy II is the second semester course on drugs of natural origin in the Indian B.Pharm, and it is mostly about secondary metabolites. The Pharmacy Council of India (PCI) syllabus calls it Pharmacognosy and Phytochemistry II. It follows Pharmacognosy and Phytochemistry I in Semester IV, which covered classification, cultivation, evaluation and primary metabolites, and it prepares students for Herbal Drug Technology later in the degree.

Where Semester IV asks "what is this drug and is it genuine?", Semester V asks three harder questions:

  1. How does the plant make the active constituent? The shikimic acid, acetate-malonate, mevalonate and amino acid pathways, and how tracer experiments proved them.
  2. Which drugs contain which constituents, and why do they matter? Monographs grouped by chemical class: alkaloids, glycosides, phenylpropanoids, flavonoids, terpenoids, tannins, resins and volatile oils.
  3. How do we get the pure compound out? Isolation, identification and analysis of named compounds, industrial production, and modern extraction and instrumental methods.

Quotable definition: Pharmacognosy II is the B.Pharm Semester V course that studies the biosynthesis, chemistry, sources, isolation, analysis and industrial production of plant secondary metabolites used in medicine.

The course rewards students who can link a structure to a pathway, a pathway to a drug, and a drug to an isolation method. Learning each topic in isolation is the main reason marks are lost.

For the Semester IV foundations (crude drugs, evaluation and microscopy), see Pharmacognosy I help.

Educational only: what this pharmacognosy II page covers

This page supports learning and assessment. It is not medical advice and gives no doses or treatment recommendations.

Many Semester V drugs are potent or toxic: digitalis, belladonna, opium, vinca and taxus among them. Uses mentioned here are the textbook uses you write in an examination, stated without doses, and nothing here suggests using any plant or extract. Questions about a medicine or herbal product you are taking should go to a pharmacist or doctor.

Worked examples use fictional laboratory readings to show the method and arithmetic expected in a practical record. They are not results for any real sample.

Pharmacognosy II at a glance: course facts, pathways and assessment

The essentials of the course on one screen, based on the Pharmacy Council of India B.Pharm scheme. Your university's own copy decides the final details.

ItemDetail
Official titlePharmacognosy and Phytochemistry II
Course codesBP504T (theory) and BP508P (practical)
When it is taughtSemester V of the four-year B.Pharm, after Pharmacognosy I in Semester IV
Theory loadAbout 45 hours across five units; 4 credits
Practical load4 hours a week; 2 credits
Practical marks15 internal (sessional) marks plus 35 in the end-semester practical exam, out of 50, in the scheme most universities follow
Core pathwaysShikimic acid, acetate-malonate, mevalonate and MEP, and amino acid pathways
Constituent classesAlkaloids, glycosides, phenylpropanoids and flavonoids, terpenoids and steroids, volatile oils, tannins, resins
Standard textbooksTrease and Evans Pharmacognosy; Kokate, Purohit and Gokhale; Mohammed Ali, Pharmacognosy and Phytochemistry
Typical assessmentSessional exams, end-semester theory paper, practical exam with record and viva

What the table tells you about revision. Units II to IV carry most of the named drugs and compounds, so a single summary sheet of drug, biological source, family, chief constituent, pathway and identification test covers a large share of the paper.

What does the Pharmacognosy II syllabus cover, unit by unit?

The PCI B.Pharm syllabus divides BP504T into five units, with the BP508P practical alongside. Universities following the PCI regulations keep this structure, though some add regional drugs or move a monograph between units. Use your department's copy as the final word on what is examinable.

UnitMain topicsTypical exam questions
IMetabolic pathways in higher plants: shikimic acid, acetate and amino acid pathways and the secondary metabolites they form; use of radioactive isotopes in biogenetic studiesOutline the shikimic acid pathway; describe tracer techniques used to study biosynthesis
IIComposition, chemistry, sources, uses and commercial applications of secondary metabolites, with named drugs: alkaloids (vinca, rauwolfia, belladonna, opium); phenylpropanoids and flavonoids (lignans, tea, ruta); steroids, cardiac glycosides and triterpenoids (liquorice, dioscorea, digitalis); volatile oils (mentha, clove, cinnamon, fennel, coriander); tannins (catechu, pterocarpus); resins (benzoin, guggul, ginger, asafoetida, myrrh, colophony); glycosides (senna, aloes, bitter almond); iridoids, other terpenoids and naphthoquinones (gentian, artemisia, taxus, carotenoids)Monograph of rauwolfia or digitalis; chemistry of anthraquinone glycosides
IIIIsolation, identification and analysis of: menthol, citral, artemisinin; glycyrrhetinic acid, rutin; atropine, quinine, reserpine, caffeine; podophyllotoxin, curcuminDescribe the isolation and identification of caffeine from tea
IVIndustrial production, estimation and utilisation of forskolin, sennosides, artemisinin, diosgenin, digoxin, atropine, podophyllotoxin, caffeine, taxol, vincristine and vinblastineIndustrial production of diosgenin and its use as a steroid precursor
VBasics of phytochemistry: modern methods of extraction; spectroscopy, chromatography and electrophoresis in the isolation, purification and identification of crude drugsSupercritical fluid extraction; role of HPTLC in herbal analysis

How the marks are split. Each PCI theory paper has internal (sessional) marks and a larger end-semester examination, and the practical is assessed separately. Unit II supplies the most monographs, Units III and IV the most process questions, and Unit I the diagrams that examiners like to see drawn correctly.

Which biosynthetic pathways make plant secondary metabolites?

Unit I is about origins. Every secondary metabolite on the syllabus can be traced back to a small number of primary building blocks.

PathwayStarting unitsMain productsSyllabus examples
Shikimic acidPhosphoenolpyruvate + erythrose-4-phosphateAromatic amino acids (phenylalanine, tyrosine, tryptophan), phenylpropanoids, lignans, coumarins, the C6-C3 part of flavonoidsPodophyllotoxin (a lignan), cinnamaldehyde, eugenol
Acetate-malonate (polyketide)Acetyl-CoA + malonyl-CoAFatty acids, anthraquinones, the A ring of flavonoidsSennosides and aloe-emodin (anthraquinones)
Mevalonate and methylerythritol phosphate (MEP)Acetyl-CoA (mevalonate) or pyruvate + glyceraldehyde-3-phosphate (MEP)Isoprene units, terpenoids, steroids, carotenoidsMenthol, artemisinin, diosgenin, digitoxigenin, taxol's diterpene core
Amino acidOrnithine, lysine, tyrosine, tryptophan, othersMost alkaloidsTropane alkaloids from ornithine; morphine from tyrosine; reserpine and vinblastine from tryptophan plus a terpenoid unit

Mixed origins earn extra marks. Flavonoids combine a shikimate-derived C6-C3 unit with three malonate units. Monoterpenoid indole alkaloids such as reserpine, vincristine and vinblastine combine tryptamine (from tryptophan) with secologanin (a terpenoid). Saying this in one line shows that you understand pathways rather than memorising boxes.

How to draw the shikimic acid pathway for an exam. Start with phosphoenolpyruvate and erythrose-4-phosphate, pass through 3-dehydroquinic acid, 3-dehydroshikimic acid and shikimic acid, then shikimate-3-phosphate, 5-enolpyruvylshikimate-3-phosphate (EPSP) and chorismic acid. Branch from chorismate to prephenate (phenylalanine and tyrosine) and to anthranilate (tryptophan). Name the key enzyme step you know, such as EPSP synthase, which is the target of the herbicide glyphosate. A clean, labelled diagram is worth more than a page of prose.

For the chemistry of each class and the isoprene rule, our Natural Products Chemistry page goes further.

How do radioactive tracer techniques prove a biosynthetic pathway?

A tracer experiment feeds a plant a labelled precursor and checks whether the label appears in the product. If it does, and in the expected position, the precursor lies on the pathway. This is how ornithine was shown to feed tropane alkaloids and mevalonate to feed terpenoids.

Isotopes commonly used

IsotopeTypeHalf-lifeTypical use
Carbon-14Radioactive, beta emitterAbout 5,730 yearsLabelling carbon skeletons
Tritium (hydrogen-3)Radioactive, beta emitterAbout 12.3 yearsFollowing hydrogen atoms and stereochemistry
Phosphorus-32Radioactive, beta emitterAbout 14.3 daysPhosphorylated intermediates
Sulphur-35Radioactive, beta emitterAbout 87 daysSulphur-containing compounds such as glucosinolates
Carbon-13, nitrogen-15, deuteriumStableNot radioactiveDetected by NMR or mass spectrometry

Experimental approaches

  1. Precursor-product sequence: feed a labelled precursor, isolate the product, measure its activity.
  2. Competitive feeding: feed a labelled precursor with an unlabelled suspected intermediate; if the intermediate is on the pathway, it dilutes the label in the product.
  3. Sequential analysis: expose the plant to labelled carbon dioxide and sample at short intervals to see the order in which compounds become labelled.
  4. Use of mutants or isolated enzymes: a blocked step causes an intermediate to build up.

Feeding methods include root feeding, stem feeding (wick or cut-stem), infiltration, spraying, and feeding to tissue or cell cultures. Detection uses a Geiger-Müller counter, liquid scintillation counting or autoradiography. Results are only meaningful after the product has been purified to constant specific activity, so that a labelled impurity is not mistaken for the product.

Worked example: tracer decay, percentage incorporation and dilution

Tracer calculations appear in internal tests and project reports. Three numbers are usually asked for.

1. How much of a short-lived label is left?

Fraction remaining = 0.5^(t ÷ half-life)

A fictional phosphorus-32 solution (half-life 14.3 days) is stored for 7 days before a feeding experiment.

  • Fraction remaining = 0.5^(7 ÷ 14.3) = 0.7123, so about 71% of the activity remains and about 28.77% has decayed.
  • After two half-lives (28.6 days), the fraction left is exactly 0.25.

For carbon-14, with a half-life of about 5,730 years, decay over a few weeks is negligible and no correction is needed.

2. What percentage of the fed label reached the product?

Percentage incorporation = (activity in purified product ÷ activity fed) × 100

A fictional plant is fed a carbon-14 precursor with a total activity of 2,000,000 disintegrations per minute (dpm). The purified alkaloid isolated later has an activity of 36,000 dpm.

  • Percentage incorporation = 36,000 ÷ 2,000,000 × 100 = 1.8%

3. How much was the label diluted?

Dilution = specific activity of precursor ÷ specific activity of product

The precursor had a specific activity of 500,000 dpm per micromole and the product 2,500 dpm per micromole.

  • Dilution = 500,000 ÷ 2,500 = 200

Interpretation. Low percentage incorporation is normal in whole-plant feeding, because the precursor is also used elsewhere. A low dilution value is stronger evidence that the precursor is close to the product on the pathway. In an answer, report both and say what each one means.

Where marks go. State the units (dpm or Bq), say that the product was purified to constant specific activity, and correct for decay when a short-lived isotope is used.

How are alkaloid drugs classified and identified?

Alkaloids are basic, nitrogen-containing plant compounds, usually with the nitrogen in a heterocyclic ring and with marked physiological activity. Semester V expects classification, general properties, tests and monographs.

Classification by ring system, with syllabus drugs

ClassPrecursorDrug examplesMain constituents
TropaneOrnithineBelladonna, datura, hyoscyamusHyoscyamine, atropine, hyoscine
QuinolineTryptophanCinchonaQuinine, quinidine, cinchonine
IsoquinolineTyrosineOpiumMorphine, codeine, papaverine, noscapine
IndoleTryptophanRauwolfia, vinca, nux vomicaReserpine; vincristine and vinblastine; strychnine and brucine
PurinePurine nucleotidesTea, coffeeCaffeine, theophylline, theobromine
SteroidalCholesterolKurchiConessine

Students also meet the older grouping into true alkaloids (heterocyclic nitrogen, from amino acids), protoalkaloids (nitrogen outside a ring, such as ephedrine) and pseudoalkaloids (not from amino acids, such as caffeine and conessine).

General tests

ReagentCompositionPositive result
Mayer'sPotassium mercuric iodideCream precipitate
Dragendorff'sPotassium bismuth iodideOrange-red precipitate
Wagner'sIodine in potassium iodideReddish-brown precipitate
Hager'sSaturated picric acidYellow precipitate

Specific tests examiners like: the Vitali-Morin test for tropane alkaloids (violet colour), the thalleioquin test for quinine (emerald green), and the murexide test for caffeine and other purines (purple with ammonia). Always write the observation, not only the name of the test.

Worked example: total alkaloid assay by back-titration

Many pharmacopoeial assays of alkaloid drugs extract the total alkaloids, dissolve them in a known excess of acid and titrate the unused acid with alkali. The alkaloid content is then expressed as a named alkaloid. For belladonna-type drugs, it is usually expressed as hyoscyamine (molar mass 289.37 g/mol), which reacts with acid in a 1:1 ratio.

Fictional readings. The purified alkaloid extract from 10 g of a powdered leaf sample is dissolved in 20 mL of 0.02 M hydrochloric acid. The excess acid needs 15.2 mL of 0.02 M sodium hydroxide.

StepCalculationResult
Acid added20 mL × 0.02 M0.400 mmol
Acid left over (equal to NaOH used)15.2 mL × 0.02 M0.304 mmol
Acid used by alkaloid0.400 − 0.3040.096 mmol
Mass as hyoscyamine0.096 mmol × 289.37 mg/mmol27.78 mg
Content in 10 g of drug27.78 mg ÷ 10,000 mg × 1000.278%

Interpretation. The sample contains about 0.28% total alkaloids calculated as hyoscyamine. Compare it with the limit in the monograph of the pharmacopoeia your college uses and cite the edition, rather than quoting a figure from memory.

Where marks go. Students often forget that the alkali measures the acid left over, not the acid used. Write all three lines (added, left over, used), keep the unit as millimoles until the final step, and state the 1:1 stoichiometry. If your manual gives an equivalence factor (milligrams of alkaloid per millilitre of titrant), show that it gives the same answer.

How are glycoside drugs grouped, and which tests identify them?

A glycoside is a compound in which a sugar (the glycone) is joined through a glycosidic bond to a non-sugar (the aglycone or genin). The aglycone decides the activity, so the syllabus groups glycosides by their aglycone.

GroupAglycone typeSyllabus drugKey test
AnthraquinoneAnthracene derivativesSenna, aloesBorntrager's test (pink to red in the ammonia layer); modified Borntrager's for bound forms
CardiacSteroid with a lactone ringDigitalisKeller-Kiliani (reddish-brown ring, bluish upper layer for deoxy sugars); Legal and Baljet tests
Saponin and triterpenoidSteroidal or triterpenoid sapogeninLiquorice, dioscoreaFroth test and haemolysis test
CyanogeneticNitrileBitter almondSodium picrate paper turns brick red
FlavonoidFlavonolRuta (rutin)Shinoda test (magnesium and hydrochloric acid gives pink to red)

Monograph points for digitalis. Digitalis purpurea and Digitalis lanata (Plantaginaceae; older texts give Scrophulariaceae) leaves contain cardioactive glycosides such as digitoxin, gitoxin and, in D. lanata, digoxin. Write the biological source, constituents, structure-activity points (steroid nucleus, 14-hydroxyl, unsaturated lactone at C-17, sugar at C-3), chemical tests, textbook use and storage. Examiners award the structure-activity points heavily because they connect chemistry to function.

Monograph points for senna. Leaflets and pods of Cassia angustifolia and Cassia acutifolia (Leguminosae; some modern texts use the genus Senna) contain sennosides A and B, which are dianthrone glycosides. Include Borntrager's test and the textbook stimulant laxative use, without doses.

What do you need to know about phenylpropanoids, tannins, resins and volatile oils?

These four groups make up a large share of Unit II short answers.

Phenylpropanoids, lignans and flavonoids. Phenylpropanoids have a C6-C3 skeleton from the shikimic acid pathway. Lignans are dimers of phenylpropanoid units; podophyllotoxin from Podophyllum is the syllabus example and the starting point for the semi-synthetic anticancer agents etoposide and teniposide. Tea is studied for its purine alkaloids and its catechins (flavan-3-ols), and ruta for rutin.

Tannins

TypeStructureBehaviourSyllabus examples
HydrolysableEsters of gallic or ellagic acid with a sugarHydrolysed by acids and enzymes; blue-black with ferric chlorideGallotannins of nutgall
Condensed (proanthocyanidins)Polymers of flavan-3-olsNot easily hydrolysed; form red phlobaphenes on heating with acid; greenish-black with ferric chloridePale catechu, black catechu, pterocarpus

The goldbeater's skin test (a brown or black colour on treated animal membrane) and the gelatin test (precipitate with gelatin solution) are the standard confirmations.

Resins. Resins are amorphous, usually water-insoluble products of plant secretion. The syllabus groups them as resins (colophony), oleoresins (ginger), oleo-gum-resins (asafoetida, myrrh, guggul) and balsams (benzoin, which contains cinnamic or benzoic acid esters). Physical constants such as acid value and solubility, and simple tests such as the colour of asafoetida with hydrochloric acid, are expected.

Volatile oils. Volatile oils are mixtures of terpenoids and phenylpropanoids responsible for the odour of plants. Syllabus drugs and their main constituents: mentha (menthol, menthone), clove (eugenol), cinnamon (cinnamaldehyde), fennel (anethole, fenchone) and coriander (linalool). They are evaluated by optical rotation, refractive index, specific gravity and chromatographic profile.

How are named phytoconstituents isolated and identified in Unit III?

Unit III questions expect a short isolation scheme for each compound: source, principle, steps, identification. Learn them as a table first, then expand any row into a full answer.

CompoundSourceIsolation principleIdentification
MentholMentha arvensis oilCooling the oil so menthol crystallises; centrifuging and recrystallisingMelting point, optical rotation, TLC against a reference
CitralLemongrass oilForming a water-soluble bisulphite adduct, then regenerating with alkaliDerivative formation, TLC, GC
ArtemisininArtemisia annua leavesExtraction with a non-polar solvent such as hexane, then column chromatography and crystallisationTLC, melting point, HPLC; the endoperoxide bridge is the key structural feature
Glycyrrhetinic acidLiquorice rootExtracting glycyrrhizin, then acid hydrolysis to release the aglyconeTLC, melting point, IR
RutinBuckwheat or rutaHot extraction with water or ethanol; rutin crystallises on coolingShinoda test, UV spectrum, TLC
AtropineBelladonna and other SolanaceaeAcid-base extraction of total alkaloids; hyoscyamine racemises to atropine on heating or with alkaliVitali-Morin test, melting point, TLC
QuinineCinchona barkBasifying the bark with lime, extracting into an organic solvent, back-extracting into dilute acid, crystallising as the sulphateFluorescence in dilute sulphuric acid, thalleioquin test
ReserpineRauwolfia rootAlcoholic extraction, acid-base partition, chromatographyFluorescence, TLC, UV
CaffeineTea leaves or tea dustHot water extraction with a base to hold back tannins, extraction into an organic solvent, sublimationMurexide test, melting point
PodophyllotoxinPodophyllum resinSolvent extraction of the resin and crystallisationTLC, melting point
CurcuminTurmeric rhizomeSolvent extraction followed by crystallisationColour change with alkali or boric acid, TLC, UV

Answer pattern. Begin with the compound's class and structure in one line, give the isolation as numbered steps, explain why each step works (polarity, basicity, crystallisation), then give two identification methods. Our Phytochemistry page explains extraction and chromatography in general; this table is the Semester V shortlist.

How are plant drugs produced industrially in Unit IV?

Unit IV asks how a laboratory isolation becomes a commercial process. Answers should cover the source, the extraction or production route, how the product is estimated, and what it is used for.

CompoundSourceProduction route (outline)EstimationUtilisation
ForskolinColeus forskohlii rootsSolvent extraction, column purification, crystallisationHPLCResearch tool (adenylate cyclase activator); nutraceutical ingredient
SennosidesSenna leaves and podsAqueous-alcoholic extraction, precipitation as calcium sennosidesSpectrophotometric or HPLC assayStimulant laxative preparations
ArtemisininArtemisia annuaSolvent extraction and crystallisation; semi-synthetic routes also developedHPLCStarting material for antimalarial derivatives
DiosgeninDioscorea tubersAcid hydrolysis of saponins, extraction of the sapogeninGravimetric, TLC or HPLCPrecursor for steroid hormone synthesis
DigoxinDigitalis lanata leavesExtraction, enzymatic processing of primary glycosides, chromatographic purificationHPLCCardiac glycoside medicine
AtropineSolanaceous plantsExtraction of hyoscyamine and racemisationTitrimetric or HPLC assayAnticholinergic medicine
PodophyllotoxinPodophyllum speciesExtraction from resin, crystallisationHPLCTopical use; precursor for etoposide and teniposide
CaffeineTea waste, decaffeination of coffeeExtraction (including supercritical carbon dioxide) or chemical synthesisHPLC, UVBeverages and medicines
Taxol (paclitaxel)Taxus speciesOriginally bark extraction; now semi-synthesis from 10-deacetylbaccatin III in needles and plant cell cultureHPLCAnticancer medicine
Vincristine and vinblastineCatharanthus roseus leavesExtraction of very low-yield dimeric alkaloids, chromatographic separation; coupling of catharanthine and vindolineHPLCAnticancer medicines

Points that lift an answer. Mention why the source is a problem (low yield for vinca alkaloids; slow-growing, endangered Taxus trees), how biotechnology helps (plant cell culture, semi-synthesis), and which quality method is used in industry (usually HPLC against a reference standard).

Which modern extraction and instrumental methods appear in Unit V?

Unit V asks how modern techniques improve on maceration, percolation and Soxhlet extraction.

Modern extraction methods

MethodPrincipleAdvantageExample use
Supercritical fluid extraction (SFE)Carbon dioxide above its critical point acts as a tunable solventNo toxic residue, low temperatureDecaffeination, essential oils
Microwave-assisted extraction (MAE)Microwave heating ruptures cellsFast, less solventFlavonoids, alkaloids
Ultrasound-assisted extraction (UAE)Cavitation disrupts cell wallsLow temperature, simple equipmentPhenolics, polysaccharides
Accelerated or pressurised solvent extractionSolvent at high temperature and pressureFast and automatedPesticide residues, constituents
Solid-phase extractionSelective adsorption on a cartridgeClean-up before analysisSample preparation for HPLC

Instrumental methods

  • Spectroscopy: UV-visible for chromophores and assays, IR for functional groups, NMR for full structure, and mass spectrometry for molecular mass and fragmentation.
  • Chromatography: TLC and HPTLC for fingerprints, column chromatography for isolation, HPLC for assays, GC for volatile oils, and hyphenated methods such as LC-MS and GC-MS for identification.
  • Electrophoresis: separation of charged molecules such as proteins, enzymes and some alkaloids in an electric field; capillary electrophoresis is used for herbal fingerprinting.

A strong answer gives each technique's principle in one line and one Semester V application, such as HPTLC fingerprinting of a senna extract or GC of mentha oil.

Worked example: comparing extraction yields and TLC Rf values

Practice maths for exams only. Not clinical guidance; always follow your local protocol and prescriber.

Unit V questions and project reports often ask you to compare an older extraction method with a modern one and to confirm a constituent by TLC. The readings below are invented teaching data for an unnamed powdered leaf drug, and every figure has been recalculated by script.

Extraction. Three portions of 25.0 g of the same powder are extracted with the same solvent by three methods, and each extract is dried to constant weight.

MethodTimeDried extract (g)Yield (% w/w)
Maceration72 h1.851.85 ÷ 25.0 × 100 = 7.4
Soxhlet extraction6 h2.902.90 ÷ 25.0 × 100 = 11.6
Ultrasound-assisted extraction0.5 h2.602.60 ÷ 25.0 × 100 = 10.4

Comparison. Ultrasound gave 2.60 ÷ 2.90 × 100 = 89.7% of the Soxhlet yield in 0.5 ÷ 6 = 0.083, or one-twelfth, of the time. Maceration gave the lowest yield and took longest.

TLC check. On a silica plate, the solvent front travels 8.0 cm. The reference marker spot travels 3.6 cm and the main spot in the ultrasound extract travels 3.5 cm.

SpotWorkingRf
Reference marker3.6 ÷ 8.00.45
Extract3.5 ÷ 8.00.4375, reported as 0.44

How to discuss it. A higher yield of dried extract is not the same as more of the active constituent: Soxhlet extraction keeps the material hot for hours, which can degrade heat-sensitive compounds, while ultrasound works at lower temperature. Similar Rf values support, but do not prove, identity; run the reference and the extract side by side on the same plate, add a co-spot, and confirm with a specific spray reagent or HPTLC densitometry if your lab has it. Mention that the yields come from single runs, so replicates would be needed before claiming one method is better.

What practicals are in BP508P, and how should records be written?

The Semester V practical moves from identifying drugs to isolating and detecting their constituents. The PCI list includes experiments of these kinds; your university's manual sets the final list.

  1. Morphology, histology and powder characteristics of selected Unit II drugs, such as cinchona, cinnamon, senna, clove, ephedra, fennel and coriander.
  2. Isolation and detection of active principles, for example caffeine from tea dust, diosgenin from Dioscorea, atropine from belladonna and sennosides from senna.
  3. Separation of sugars by paper chromatography.
  4. TLC of herbal extracts.
  5. Distillation of volatile oils and detection of their phytoconstituents by TLC.
  6. Analysis of crude drugs by chemical tests, such as for asafoetida, benzoin, colophony, aloes and myrrh.

Record layout that examiners mark quickly

HeadingWhat to include
AimCompound, source drug and method in one sentence
PrincipleWhy the method works: solubility, basicity, sublimation, polarity
ProcedureNumbered steps, with quantities and conditions
ObservationsWeights, colours, Rf values or titres, with replicates
CalculationFormula, numbers and units, as in the back-titration example above
ResultValue with units and an identification test confirming the compound
PrecautionsTwo or three, such as using a fume hood for organic solvents

Viva questions to prepare: why sodium carbonate is added when extracting caffeine, why hyoscyamine becomes atropine during isolation, what a Dragendorff spray shows on a TLC plate, and why a volatile oil is collected over water.

How do you write a Pharmacognosy II monograph or isolation answer step by step?

Two answer types dominate Semester V: the drug monograph and the isolation scheme. Each has a fixed structure.

Drug monograph (Unit II)

  1. Synonyms and the official name.
  2. Biological source: part used, botanical name (italicised when typed, underlined when handwritten) and family.
  3. Geographical source.
  4. Cultivation and collection in three to five lines.
  5. Macroscopy and, for organised drugs, a labelled sketch of the transverse section or powder.
  6. Chemical constituents, with the structure of the main one.
  7. Biosynthetic origin in one line, linking to Unit I.
  8. Chemical tests with observations.
  9. Uses (textbook uses only) and commercial applications.
  10. Adulterants or substitutes.

Isolation scheme (Units III and IV)

  1. Name the compound, its class and its source.
  2. Draw a flow chart from powdered drug to pure compound.
  3. Explain the principle of each separation step.
  4. Give two identification or estimation methods.
  5. End with the use or commercial importance in one line.

A worked outline: caffeine from tea. Caffeine is a purine alkaloid. Tea dust is boiled with water and sodium carbonate, which converts tannins to their salts so that they stay in the water layer. The filtered extract is shaken with an organic solvent such as dichloromethane, which takes up caffeine. The solvent is evaporated and the crude caffeine is purified by sublimation. Identity is confirmed by the murexide test and melting point.

Line 7 in the monograph, the biosynthetic origin, is the step most students leave out, and it is the one that shows the examiner you can connect the units.

Where do Pharmacognosy II students lose marks?

MistakeWhat to do instead
Drawing the shikimic acid pathway without naming chorismic acidShow chorismate as the branch point to phenylalanine, tyrosine and tryptophan
Saying all alkaloids come from amino acidsMention pseudoalkaloids such as caffeine and steroidal alkaloids
Confusing atropine and hyoscyamineHyoscyamine is the natural (−) form; atropine is the racemate formed during isolation
Giving the Keller-Kiliani test for all glycosidesIt detects 2-deoxy sugars typical of cardiac glycosides
Writing "tannins give a colour with ferric chloride" without the colourBlue-black for hydrolysable, greenish-black for condensed tannins
Reporting percentage incorporation without purificationState that the product was purified to constant specific activity
Using the alkali titre as the acid used in a back-titrationSubtract the acid left over from the acid added
Listing extraction methods without principlesGive one line of principle and one example for each
Writing uses as dosing instructionsState the textbook use only, without doses
Quoting pharmacopoeial limits from memoryCite the monograph and edition

A tutor's observation. In Unit III answers, most lost marks come from steps written without a reason. "Add sodium carbonate" earns little; "add sodium carbonate so that tannins form water-soluble salts and stay behind" earns the mark.

What do markers look for in Pharmacognosy II answers and records?

  • Pathway diagrams that are neat, labelled and show the branch points.
  • Correct links between class, pathway and drug, for example tropane alkaloids from ornithine in belladonna.
  • Monographs under consistent headings, with the biological source and family stated first.
  • Structures of key constituents such as caffeine, atropine, quinine, digitoxigenin, menthol and podophyllotoxin.
  • Isolation schemes with reasons, not only steps.
  • Identification tests with their observations, written in a table where possible.
  • Practical records with formulas, raw readings, units and a comparison with the official value.
  • Viva answers that are short and accurate.

Examiners give little credit for long history, generic praise of herbal medicine, or uses written as advice.

Which tools and resources help with Pharmacognosy II?

ResourceWhat it is for
Indian Pharmacopoeia, British Pharmacopoeia, USPOfficial monographs, assays and limits
WHO monographs on selected medicinal plantsShort, citable summaries of constituents and uses
WHO Quality control methods for herbal materialsStandard test methods
PubChem and ChemSpiderStructures, molecular formulas and identifiers
ChemDraw or ChemSketchDrawing structures and pathway diagrams
KEGG pathway mapsChecking intermediates in biosynthetic pathways
Plants of the World OnlineAccepted botanical names and families
ImageJMeasuring TLC spots and micrographs from images

For the plants behind modern medicines, see our Medicinal Plants page; for evaluation methods covered in Semester IV, revisit Pharmacognosy.

How is Pharmacognosy II taught in the UK, US, Australia, Canada and India?

India. The PCI B.Pharm places Pharmacognosy and Phytochemistry II in Semester V (BP504T and BP508P), followed by Herbal Drug Technology in Semester VI. The D.Pharm under the Education Regulations 2020 has one Pharmacognosy course in the first year, with a shorter drug list and no detailed biosynthesis. M.Pharm Pharmacognosy and GPAT both expect Semester V material in depth.

United Kingdom. MPharm degrees accredited by the General Pharmaceutical Council teach natural product chemistry and biosynthesis within medicinal chemistry modules, with emphasis on drug discovery from plants and the regulation of herbal medicines.

United States. PharmD programmes accredited by ACPE usually cover natural products within medicinal chemistry, pharmacology and dietary-supplement teaching. Graduate programmes in pharmacognosy focus on isolation, structure elucidation and drug discovery.

Australia. Pharmacy programmes discuss natural products in medicinal chemistry and complementary medicines teaching, linked to the Therapeutic Goods Administration's regulatory framework.

Canada. Pharmacy degrees cover natural health products, regulated by Health Canada, mostly within therapeutics and self-care teaching.

What this means for you. An Indian Semester V paper expects monographs, pathway diagrams and isolation schemes. International assignments are more likely to ask about drug discovery, structure elucidation or the quality and regulation of plant-derived products. Tell your tutor which system you study under so the explanations match your marking scheme.

How is pharmacognosy taught in Ireland, New Zealand, Europe, Singapore, Malaysia and the Gulf?

Outside India, Pharmacognosy II rarely exists as a course with that name, but its content appears inside pharmacy and pharmaceutical science degrees everywhere.

RegionWhere the content sitsTypical assessment angle
IrelandFive-year integrated MPharm degrees accredited by the Pharmaceutical Society of Ireland, within pharmaceutical chemistry and natural products teachingDrug discovery from plants, quality of herbal products
New ZealandFour-year BPharm degrees, with natural products inside medicinal chemistry and complementary medicines teachingShort reports and exam questions on plant-derived drugs
GermanyPharmazeutische Biologie, a core subject of the state-examined pharmacy degreePlant drug identification, constituents and analysis
Netherlands and FrancePharmacy degrees under the Bologna system in ECTS credits; French courses keep the name pharmacognosieNatural product chemistry, herbal regulation, lab work
EU-wide contextThe European Medicines Agency's Committee on Herbal Medicinal Products prepares EU herbal monographs; Directive 2004/24/EC created the traditional herbal registration routeEssays on how plant medicines are regulated
Singapore and MalaysiaPharmacy degrees cover natural products within medicinal chemistry; Malaysia's NPRA registers traditional products, and local medicinal plants are a strong research themeProjects on extraction, standardisation and quality control
GCC: UAE, Saudi Arabia, Qatar, Kuwait, Oman, BahrainPharmD and BPharm programmes, several with pharmacognosy departments in their colleges of pharmacyMonographs, phytochemical screening and research projects on regional plants

Quality control is the shared language. Whatever the course title, examiners everywhere expect you to know how plant materials are tested. WHO's Quality control methods for herbal materials (2011) sets out standard tests such as foreign matter, ash values, extractive values and chromatographic fingerprints, and it is a citable source for assignments in any country.

Educational only: this section describes how the subject is taught and regulated. It makes no recommendation about using any herbal product.

Which Pharmacognosy II assignments do we help with, and how does a session work?

Typical work students bring

  • Pathway diagrams and explanations for Unit I
  • Monographs for Unit II drugs, including structures
  • Isolation and industrial production answers for Units III and IV
  • BP508P practical records, calculations and TLC write-ups
  • Viva preparation and mock questions
  • Seminars on topics such as taxol production, artemisinin or supercritical fluid extraction
  • International assignments on natural-product drug discovery

How a session works

  1. Send your brief. Share the syllabus page, questions or practical, and your deadline. The quote is free.
  2. Tutor match. FLN Tutors matches you with a tutor who has a pharmacy or natural-products background.
  3. Plan. The tutor checks your university's pattern and your weakest units.
  4. Learn. Live online sessions or written explanations: pathways drawn step by step, isolation schemes with reasons, calculations shown line by line.
  5. Feedback. The tutor reviews your own drafts, diagrams and records.
  6. Revisions. Free revisions within the original brief if something needs another look.

Sessions run online across time zones, and faster delivery options are available close to a deadline.

Who tutors Pharmacognosy II, and which subjects connect to it?

Pharmacognosy II students are matched with tutors who hold an M.Pharm or PhD in pharmacognosy, phytochemistry or natural products chemistry, many with teaching or research laboratory experience, so pathways, monographs and isolation schemes are explained in the format university examiners and viva panels expect.

Where Semester V leads. Several later courses build directly on this one, so gaps here tend to resurface:

A useful first message. Send your university's syllabus page, the units you find hardest, any practical record pages you want checked, and your exam or viva date. A tutor can then plan sessions around the units with the most marks.

Educational only: sessions explain course content for examinations and practicals; they give no advice on using any plant, extract or medicine.

How much does Pharmacognosy II help cost?

The price reflects the task, its length, your semester and the deadline, and you see it in a free quote first. A single revision session on pathways is priced differently from a set of practical records or a seminar. You see the price in a free quote before deciding, and asking costs nothing.

For a fast, accurate quote, send your university and semester, the questions or practical list, the number of answers or pages, and your deadline with your time zone. Refunds and revisions follow the policy shown on the site, and nothing on this page changes it.

Using Pharmacognosy II help within your course rules

Tutoring that explains the syllabus and reviews your own work is allowed at almost every university. Submitting work you did not write or do not understand can breach academic integrity rules, and practical records and vivas exist to test your own understanding.

FLN Tutors works on that basis: tutors explain, demonstrate methods and give feedback, so that what you submit is your own. Treat the worked examples here and in sessions as learning material, not text to copy, and follow any rules your institution sets on outside help. Your files and questions are kept confidential.

Stuck on a Pharmacognosy II question?

Send it to a Pharmacognosy II tutor for step-by-step working. The quote is free.

What you get

Every Pharmacognosy II order includes

  • Written from scratch to your exact brief
  • Fully referenced in your required citation style
  • Plagiarism-checked before delivery
  • Free revisions until you are satisfied
  • 100% confidential — your privacy protected
3 hours
Fastest delivery
Free, unlimited
Revision policy

Simple process

How your Pharmacognosy II help works

01

Describe your Pharmacognosy II task

Tell us your assignment brief, word count, deadline, and academic level. The more detail, the better the match.

02

Matched to a specialist

We pair you with a Pharmacognosy II expert whose background aligns with your specific topic and university requirements.

03

Delivered, checked, revised

Your work arrives before the deadline, plagiarism-checked. Free revisions until it meets your exact requirements.

Takes about two minutes. The quote is free.

Pharmacognosy II and related specialists

Who handles your Pharmacognosy II work

Every expert is degree-verified and quality-tested before joining.

  • Sumit Kumar

    S. Kumar

    VERIFIED
    Pharmacology & Pharmaceutical Sciences Expert

    I specialize in Pharmacology and Pharmaceutical Sciences, with a focus on Clinical Pharmacology, Drug Discovery and Development, Pharmacokinetics, Pharmacodynamics, and Toxicology. I help students understand complex pharmaceutical concepts through clear explanations and…

    • Drug Mechanism of Action Analysis
    • Pharmacological Data Interpretation
    • Pharmacokinetic Calculations
    • Pharmacodynamic Analysis
    15$/hr
    Rate
  • Divyanshi  sharma

    D. sharma

    VERIFIED
    Pharmacy & Pharmacology Expert

    I am passionate about making pharmacy and pharmacology easier to understand by connecting scientific concepts with practical healthcare applications. My teaching focuses on general pharmacology, clinical pharmacology, pharmacokinetics, pharmacodynamics, drug mechanisms of…

    • Pharmacological Analysis
    • Pharmacokinetic Calculations
    • Pharmacodynamic Analysis
    • Drug Mechanism Interpretation
    13$/hr
    Rate
  • Rahul Sani

    R. Sani

    VERIFIED
    Pharmacology Expert & Tutor

    Understanding how medicines work in the human body is essential for safe and effective healthcare. As a Pharmacology Tutor, I focus on helping students build a strong understanding of Clinical Pharmacology, Pharmacokinetics, Pharmacodynamics, Drug Mechanisms of Action, and…

    • Pharmacological Concept Analysis
    • Drug Mechanism Interpretation
    • Pharmacokinetic Calculations
    • Pharmacodynamic Analysis
    15$/hr
    Rate
  • Dilip Shanghvi

    D. Shanghvi

    VERIFIED
    Medical & Pharmaceutical Biotechnology Expert

    I am a Medical and Pharmaceutical Biotechnology expert specializing in Biopharmaceuticals, Drug Discovery and Development, Molecular Biology, Genetic Engineering, Immunology, and Biochemistry. Dedicated to helping students understand complex scientific concepts, strengthen…

    • DNA & RNA Analysis
    • Molecular Biology Techniques
    • PCR & Gel Electrophoresis
    • Cell Culture Techniques
    12$/hr
    Rate

Student reviews

What students say about Pharmacognosy II help

Used FLN Tutors? Be one of the first to share how it went, in writing or in a short video.

Pharmacognosy II tutoring: frequently asked questions

What is Pharmacognosy II in B.Pharm?

Pharmacognosy II, officially Pharmacognosy and Phytochemistry II, is the Semester V B.Pharm course on plant secondary metabolites. It covers biosynthetic pathways and tracer studies, monographs of alkaloid, glycoside, volatile oil, tannin and resin drugs, isolation of named compounds, industrial production of plant medicines, and modern extraction and instrumental methods.

Which semester is Pharmacognosy II taught in?

Under the Pharmacy Council of India B.Pharm syllabus, Pharmacognosy and Phytochemistry II is taught in Semester V, in the third year, after Pharmacognosy I in Semester IV. Herbal Drug Technology follows in Semester VI. Check your university's syllabus copy, because some institutions move individual drugs between units.

What are the five units of Pharmacognosy II?

Unit I covers metabolic pathways and tracer techniques. Unit II covers secondary metabolite classes with named drugs. Unit III covers isolation, identification and analysis of compounds such as caffeine, quinine and rutin. Unit IV covers industrial production of compounds such as taxol and diosgenin. Unit V covers modern extraction and instrumental methods.

How do I remember which pathway makes which compound?

Group compounds by their building blocks. Shikimic acid gives aromatic amino acids, phenylpropanoids and lignans. Acetate-malonate gives fatty acids and anthraquinones. Mevalonate and MEP give terpenoids and steroids. Amino acids give most alkaloids. Then learn mixed cases, such as flavonoids and indole alkaloids, which combine two pathways.

How is percentage incorporation calculated in tracer studies?

Divide the radioactivity of the purified product by the total radioactivity fed, then multiply by 100. If a plant is fed 2,000,000 dpm and the purified product carries 36,000 dpm, incorporation is 1.8 percent. Correct for decay when using a short-lived isotope, and purify the product to constant specific activity first.

Why does hyoscyamine turn into atropine during isolation?

Hyoscyamine has a chiral centre in its tropic acid part. Heat or alkali during extraction allows that centre to invert, so the natural laevorotatory form converts into a racemic mixture, which is atropine. This is why many isolation schemes deliberately produce atropine, and why exam answers should mention racemisation.

How is caffeine isolated from tea in the BP508P practical?

Tea dust is boiled with water and sodium carbonate, which keeps tannins in the water layer as salts. Caffeine is extracted from the cooled filtrate into an organic solvent, the solvent is evaporated, and the crude product is purified by sublimation. Identity is confirmed by the murexide test and melting point.

What is the difference between hydrolysable and condensed tannins?

Hydrolysable tannins are esters of gallic or ellagic acid with a sugar; acids or enzymes break them down, and they give a blue-black colour with ferric chloride. Condensed tannins are polymers of flavan-3-ols; they resist hydrolysis, form red phlobaphenes when heated with acid, and give a greenish-black colour.

Why is taxol production difficult, and how was it solved?

Paclitaxel was first obtained from the bark of slow-growing Taxus trees in very small amounts, which threatened the species. Production moved to semi-synthesis from 10-deacetylbaccatin III, which is extracted from renewable needles, and to plant cell culture. This is a standard Unit IV example of biotechnology solving a supply problem.

Can someone help me with my Pharmacognosy II assignment?

Yes. A pharmacy-trained tutor can explain pathways, set out monographs and isolation schemes, check your practical calculations and review your drafts. You send the questions and deadline, receive a free quote, and the tutor works with you so the final answer is written and understood by you.

Which books are used for Pharmacognosy II?

Most colleges recommend Trease and Evans Pharmacognosy, the Kokate, Purohit and Gokhale textbook and Mohammed Ali's Pharmacognosy and Phytochemistry. Dewick's Medicinal Natural Products explains biosynthetic pathways in more depth, and the Indian Pharmacopoeia gives official monographs and tests. Use your syllabus reading list first, because colleges differ on the main text.

How fast can I get Pharmacognosy II help before an exam?

Help can often start the same day. Delivery options on the site run from 3 hours to 48 hours, depending on the amount of work. For exam revision, send the units and your exam date early, so the tutor can begin with the topics that carry the most marks in your university's papers.

How much does Pharmacognosy II tutoring cost?

The price depends on the work type, length, level and deadline, and it appears in your free quote before you decide. Asking costs nothing. Sending your university, semester, questions and deadline helps produce an accurate quote quickly. Our published site policy governs refunds and revisions.

Is using a tutor for Pharmacognosy II coursework allowed?

Tutoring that explains topics and reviews your own drafts is generally allowed. Copying someone else's answers or practical results is not. Records and vivas test your own understanding, so use a tutor to learn the methods and write your work yourself, following any rules your college sets on outside help.

Is my Pharmacognosy II work kept confidential?

Yes. Your record book pages, drafts and messages remain confidential and are used for nothing except your sessions. Tutors do not share your work or identity with your college or other students. You decide what to send and can remove names or roll numbers from documents before sharing them.

Does this page recommend any herbal medicine?

No. This page is educational only and gives no doses or treatment advice. Drug uses are textbook uses for examination answers. Several Semester V plants, such as digitalis, belladonna and vinca, are toxic. Anyone with a question about a medicine or herbal product they use should ask a pharmacist or doctor.

Which structures should I learn for Pharmacognosy II?

Learn the structures most often asked in your university's papers, typically caffeine, atropine, quinine, reserpine's indole core, morphine, digitoxigenin with its lactone ring, menthol, citral, artemisinin with its endoperoxide bridge, rutin, curcumin and podophyllotoxin. Practise drawing them neatly with the key functional groups labelled.

What is supercritical fluid extraction in Unit V?

Supercritical fluid extraction uses a substance, usually carbon dioxide, above its critical temperature and pressure, where it behaves partly like a gas and partly like a liquid. Changing pressure or temperature tunes its solvent power. It leaves no toxic residue and works at low temperature, which is why it is used for decaffeination.

How should I prepare for the Pharmacognosy II viva?

For each experiment, prepare short answers on the principle, the purpose of each reagent, and the identification test. Expect questions on Dragendorff's spray, racemisation of hyoscyamine, sublimation of caffeine and back-titration. Also practise naming the biological source, family and main constituent of every Unit II drug.

Is Pharmacognosy II useful for GPAT and M.Pharm entrance?

Yes. GPAT regularly asks about biosynthetic precursors, alkaloid and glycoside classes, chemical tests, sources of anticancer and antimalarial compounds, and modern extraction methods, all central to Semester V. A summary table of drug, family, constituent, pathway and test built during the course makes later revision much faster.

Question not answered here?

Not sure which service you need?

Tell us your assignment brief and deadline — we'll match you with the right expert and service instantly.

Money-Back Guarantee

Full refund if we miss the agreed deadline, can't find a suitable expert, or major errors can't be fixed by revision.

Learn more →

100% Confidential

Your identity, order details and institution are never shared with any third party.

Learn more →

Deadline-Backed Delivery

Every order has an agreed deadline. If we don't deliver by it, you can claim a full refund.

Learn more →

Get started today

Ready to get expert help?

Tell us what you need and get matched with a tutor who teaches your subject. Delivered on time, every time.

See how it works
Instant quoteNo account needed to get a priceFree revisions100% confidential